Классификация USP L ВЭЖХ колонок Agilent Technologies
The US Pharmacopeia (USP) is a standard source for many pharmaceutical methods. The USP specifies columns by packing materials rather than by manufacturer. The USP has updated its L1 definitions, listed below you will see the most recent definitions and columns that apply. Rapid Resolution High Throughput (RRHT) columns are now choices in the L1, L7, and L11 categories. |
|
USP | Column | ||
L1 | Octadecyl silane chemically bonded to porous silica or ceramic microparticles, 1.5 to 10 µm in diameter, or a monolithic rod |
Poroshell 120 EC-C18 Poroshell 120 SB-C18 Poroshell 300SB-C18 Poroshell 300 Extend-C18 ZORBAX Eclipse Plus C18 ZORBAX Eclipse XDB-C18 ZORBAX StableBond SB-C18 ZORBAX Rx-C18ZORBAX Extend-C18 ZORBAX ODS |
ZORBAX ODS classic Pursuit XRs C18 Pursuit C18 Pursuit C18-A Polaris C18-Ether SepTech ST60 C18 SepTech ST150 C18 Agilent Prep C18 |
L3 | Porous silica particles, 1.5 to 10 µm in diameter, or a monolithic silica rod | ZORBAX HILIC Plus ZORBAX SIL ZORBAX Rx-SIL Pursuit XRs Si Polaris Si-A Agilent Prep |
|
L7 | Octylsilane chemically bonded to totally porous silica particles, 1.5 to 10 µm in diameter, or a monolithic silica rod |
Poroshell 120 EC-C8 Poroshell 120 SB-C8 Poroshell 300SB-C8 ZORBAX Eclipse Plus C8 ZORBAX Eclipse XDB-C8 ZORBAX SB-C8 ZORBAX Rx-C8 ZORBAX C8 Pursuit XRs C8 Pursuit C8 Polaris C8-A Polaris C8-Ether |
|
L8 | An essentially monomolecular layer of aminopropylsilane chemically bonded to totally porous silica gel support, 3 to 10 µm in diameter |
ZORBAX NH2 Polaris NH2 |
|
L9 | Irregular or spherical, totally porous silica gel having a chemically bonded, strongly acidic cation-exchange coating, 3 to 10 µm in diameter |
ZORBAX SCX | |
L10 | Nitrile groups chemically bonded to porous silica particles, 3 to 10 µm in diameter | ZORBAX CN ZORBAX SB-CN ZORBAX Eclipse XDB-CN |
|
L11 | Phenyl groups chemically bonded to porous silica particles, 1.5 to 10 µm in diameter | ZORBAX Eclipse XDB Phenyl ZORBAX Eclipse Plus Phenyl-Hexyl ZORBAX Phenyl Poroshell 120 Phenyl-Hexyl Pursuit XRs DiPhenyl Pursuit DiPhenyl |
|
L13 | Trimethylsilane chemically bonded to porous silica particles, 3 to 10 µm in diameter | ZORBAX TMS | |
L14 | Silica gel having a chemically bonded, strongly basic quaternary ammonium anion-exchange coating, 5 to 10 µm in diameter |
ZORBAX SAX IonoSpher A |
|
L17 | Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the hydrogen form, 7 to 11 μm in diameter |
Hi-Plex H | |
L19 | Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the calcium form, 9 μm in diameter |
Hi-Plex Ca Hi-Plex Ca (Duo) |
|
L20 | Dihydroxypropane groups chemically bonded to porous silica particles, 3 to 10 μm in diameter |
LiChrospher Diol | |
L21 | A rigid spherical styrenedivinylbenzene copolymer, 5 to 10 µm in diameter | PLRP-S Plgel |
|
L22 | A cation-exchange resin made of porous polystyrene gel with sulfonic acid groups, about 10 µm in size |
Hi-Plex H | |
L25 | Packing having the capacity to separate compounds with a MW range from 1,000 to 5,000 da (as determined by the polyethylene oxide), applied to neutral, anionic and cationic water-soluble polymers. A polymethacrylate resin base, crosslinked with polyhydroxylated ether (surface contained some residual carboxyl functional gruops) was found suitable |
PL aquagel-OH | |
L33 | Packing having the capacity to separate dextrons by molecular size over a range of 4,000 to 500,000 da. It is spherical, silica-based, and processed to provide pH stability |
ZORBAX GF-250 Bio SEC-3 Bio SEC-5 ProSEC |
|
L34 | Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the lead form, about 9 µm in diameter |
Hi-Plex Pb | |
L35 | A zirconium-stabilized spherical silica packing with a hydrophilic (diol- type) molecular monolayer bonded phase having a pore size of 150Å |
ZORBAX GF-250 ZORBAX GF-450 |
|
L43 | Pentafluorophenyl groups chemically bonded to silica particles by a propyl spacer, 5 to 10 µm in diameter |
Pursuit PFP | |
L45 | Beta cyclodextrin bonded to porous silica particles, 5 to 10 µm in diameter | ChiraDex Chiral | |
L50 | Multifunction resin with reversed-phase retention and strong anion- exhange functionalities. The resin consists of ethylvinylbenzene, 55% cross-linked with divinylbenzene copolymer, 3 to 15 µm in diameter, and a surface area of not less than 350 m2 per g. Substrate is coated with quarternary ammonium functionalized latex particles consisting of styrene cross-linked with divinylbenzene |
ZORBAX 300SCX | |
L52 | Weak cation-exchange resin made of porous silica with sulfopropyl groups, 5 to 10 µm in diameter |
IonoSpher C | |
L53 | Weak cation-exchange resin consisting of ethylvinylbenzene, 55% crosslinked with divinylbenzene copolymer, 3 to 15 µm diameter. Substrate is surface grafted with carboxylic acid and/or phosphoric acid functionalized monomers. Capacity not less than 400 µEq/column |
Bio SAX | |
L56 | Propyl silane chemically bonded to totally porous silica particles, 3 to 10 | ZORBAX SB-C3 | |
L57 | A chiral-recognition protein, ovomucoid, chemically bonded to silica particles, about 5 µm in diameter, with a pore size of 120Å |
Ultron ES-OVM | |
L58 | Strong cation-exchange resin consisting of sulfonated cross-linked styrene-divinylbenzene copolymer in the sodium form, about 6 to 30 µm in diameter |
Hi-Plex Na Hi-Plex Na (Octo) |
|
L60 | Spherical, porous silica gel, 10 µm in diameter, the surface has been covalently modified with alkyl amide groups and endcapped |
ZORBAX Bonus-RP Poroshell 120 Bonus-RP Polaris Amide-C18 |
Данный раздел находится в разработке.
Goals of Sample Preparation
Successful sample preparation for most analytical techniques (HPLC, UPLC, ™LC-MS, UV, GC, etc.)
has a threefold objective. It needs to provide the sample component of interest:
■■ In solution
■■ Free from interfering matrix elements
■■ At a concentration appropriate for detection or measurement
Waters™ Sample Preparation Solutions for quantitative analysis make it easy to deliver a sample that is reproducible with
high recovery and free of interferences. Based on simple, logical workflows that produce clean samples through selective
separations, Waters Sample Preparation Products maximize sensitivity, increase throughput, and enable the development of
robust methods.